The principle of MQS-9A series shared bicycle lock micro switch
The shared bicycle lock micro switch is a switch device used to control the state of the lock. Its principle is to use the spring and contacts inside the micro switch. When the lock body is opened and closed, the micro switch follows the movement of the lock body, so that the contacts connect or disconnect the circuit, thereby realizing the opening or closing of the lock. Specifically, when the lock body is closed, the spring of the micro switch will separate the contacts and the circuit will be disconnected. At this time, the state of the shared bicycle is “locked”; and when the lock body is opened, the spring of the micro switch will make the contact The contacts are in contact, the circuit is closed, and the state of the shared bicycle is “unlocked”.
The user can unlock by scanning the QR code or using the mobile APP, and then close the lock body through the lock button after use, and the micro switch will follow the movement of the lock body to switch the state. In short, the MQS-9A series shared bicycle lock micro switch is an important control device. Through its internal structure and principle, it realizes the unlocking and locking functions of shared bicycles, and provides a convenient and fast way for riders to travel.
How to detect the micro switch of shared bike lock
The shared bicycle lock micro switch is one of the key components of the shared bicycle, and its function is to control the opening and closing of the bicycle lock. If the micro switch fails, the car lock cannot be opened or closed, which will affect the user experience. In order to detect the shared bicycle lock micro switch, we need to use a test tool such as a multimeter or multimeter. First, set the test tool to the resistance measurement mode, and connect the test leads to the two pins of the micro switch respectively. At this point, the micro switch should be in the off state, and the resistance value displayed by the test tool should be infinite. Next, lightly press the micro switch with your hand to turn it on. At this point, the resistance value displayed by the test tool should be close to zero. If the test result meets the above description, it means that the micro switch works normally; otherwise, if the test result is abnormal, it means that the micro switch is faulty and needs to be replaced or repaired.
How to detect the micro switch of shared bike lock
The shared bicycle lock micro switch is one of the key components of the shared bicycle, and its function is to control the opening and closing of the bicycle lock. If the micro switch fails, the car lock cannot be opened or closed, which will affect the user experience. In order to detect the shared bicycle lock micro switch, we need to use a test tool such as a multimeter or multimeter. First, set the test tool to the resistance measurement mode, and connect the test leads to the two pins of the micro switch respectively. At this point, the micro switch should be in the off state, and the resistance value displayed by the test tool should be infinite. Next, lightly press the micro switch with your hand to turn it on. At this point, the resistance value displayed by the test tool should be close to zero. If the test result meets the above description, it means that the micro switch works normally; otherwise, if the test result is abnormal, it means that the micro switch is faulty and needs to be replaced or repaired.
Troubleshooting of micro switch of shared bike lock
Microswitch of shared bike lock is an important part to control the locking and unlocking of shared bike. If the fault occurs, the user experience will be affected.
Here are some common troubleshooting methods:
- Check whether the battery is normal. If the battery is low, the microswitch may not work properly and you need to replace the battery.
- Check the lock body for foreign bodies. If there is debris or dust in the lock body, the microswitch may be stuck and cannot work normally. Therefore, you need to clean the lock body.
- Check whether the micro switch is damaged. If the micro switch is damaged, it may fail to properly control the opening and closing of the lock body, and you need to replace the micro switch.
- Check whether the cable is normal. If the circuit is damaged or the contact is poor, the microswitch may not work properly. You need to check the circuit and repair it. To sum up, the troubleshooting of the microswitch of shared bike lock needs to consider various factors comprehensively, discover and solve the problem in time, so as to ensure the normal use experience of users.